Saltar al contenido principal

Fix Your Stuff

Right to Repair

Parts & Tools

Cambios al paso #4

Editado por Andrew Tsao

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Remove the outer frame and and pull the cables through the hole. Flip the frame upside down.
[* red] Remove the screws at the bottom holding the buttons down and then remove and replace the buttons.
[* icon_cautionicon_note] In picture 2, the power button is the left (relative to the picture, not the orientation) and the brightness is the right button. If you orient the frame so that the buttons are at the bottom and the white dots on them are facing you, the power is on the right and the brightness is on the left
[* icon_cautionicon_note] In picture 2, the power button is the left (relative to the picture, not the orientation) and the brightness is the right button. If you orient the frame so that the buttons are at the bottom and the white dots on them are facing you, the power is on the right and the brightness is on the left