Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y Herramientas

Cambios al paso #4

Editado por Alan Truong

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Remove the outer frame and and pull the cables through the hole. Flip the frame upside down.
[* red] Remove the screws at the bottom holding the buttons down and then remove and replace the buttons.
[* icon_note]
In picture 2, the power button is the left (relative to the picture, not the orientation)right and the brightness is the rightleft button. If you orient
[* orange] Remove
the frame so that the buttons arescrews at the bottom andholding the white dots on thembutton(s) down
[* icon_note] In this picture we
are facing you,removing the power is on the right and the brightness is on the leftbutton
[* red] Remove the screws at the bottom holding the buttons down and then remove and replace the buttons.
[* icon_note]
In picture 2, the power button is the left (relative to the picture, not the orientation)right and the brightness is the rightleft button. If you orient
[* orange] Remove
the frame so that the buttons arescrews at the bottom andholding the white dots on thembutton(s) down
[* icon_note] In this picture we
are facing you,removing the power is on the right and the brightness is on the leftbutton

Imagen 1

Versión Antigua

Nueva Versión

Imagen 2

Versión Antigua

Nueva Versión

Imagen 3

Versión Antigua

Nueva Versión