Saltar al contenido principal

Cambios a Paso #2

Editado por iRobot

Aprobación pendiente

Sin cambios

Líneas de Paso

[* black] Pull the keyboard ribbon straight up from the logic board. Place the keyboard aside.
[* icon_note] The connector may be tight. Gently rock the connector from side to side while pulling directly upward to free it. You can use this technique on many of the cards and cables you'll be disconnecting.
[* icon_note] Make sure you have removed the laptop battery and CD/DVD modules from the expansion bays before proceeding.

Imagen 1

Ninguna imagen anterior