Paso HP All-in-one PC Model 24 Motherboard Replacement Historial #14 - iFixit

Cambios al paso #14

Editado por Drake Watters — 21 de nov. de 2024

Edicion aprobada por Drake Watters

: Antes
: Después
: Sin cambios

Líneas de Paso

	[title] Removing the Power Button Board
-	[* icon_note] *Optional*: This step is optional and not necessary for replacing the motherboard. However, if you want to ~~feel cool~~, you can remove it.
-	[* black] *Unscrew the Power Button*: ~~If the power button is secured by screws, use~~ a screwdriver to remove the screws holding the button in place. Keep the screws in a safe location for reassembly.
-	[* black] *Gently Detach the Power Button*: Once the screws are removed, carefully detach the power button from its mounting position.
+	[* icon_note] *Optional*: This step is optional and not necessary for replacing the motherboard. However, if you want to replace or check this part out, you can remove it.
+	[* black] *Unscrew the Power Button*: Use a screwdriver to remove the screws holding the button in place. Keep the screws in a safe location for reassembly.
+	[* black] *Gently Detach the Power Button*: Once the screws are removed, carefully detach the power button from its mounting position. Make sure to remove the ribbon cable carefully so it is not damaged.