Paso HP All-in-one PC Model 24 Motherboard Replacement Historial #6 - iFixit

Cambios al paso #6

Editado por Drake Watters — 21 de nov. de 2024

Edicion aprobada por Drake Watters

: Antes
: Después
: Sin cambios

Líneas de Paso

	[title] Removing the Ribbon Cable from the Screen
	[* red] *Disconnect the Ribbon Cable*: Gently lift the small locking mechanism or tab that secures the ribbon cable.
	[* icon_note] *Note*: This is often a ZIF (Zero Insertion Force) connector, which can be carefully pulled up to release the cable.
	[* icon_caution] *Warning*: Be very gentle when handling the ribbon cable, as it can be fragile and can tear if too much force is applied.
	[* black] *Carefully remove the Ribbon Cable*: Once the tab is lifted, gently pull the ribbon cable out of its connector.
	[* icon_note] *Note*: Take care not to pull on the cable too harshly, as it may be connected to other parts. Also, make sure it is not bent or damaged during the process
+	[* icon_note] *Note* If your fingernails cannot reach the connector, see step 13 for an alternative method.