Saltar al contenido principal

Cambios al paso #4

Editado por Sarah Westberg

Edicion aprobada por Sarah Westberg

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Remove the two 3.3 mm screws from the silver panels using a Phillips #00 screwdriver.
-[* orange] Remove the two 3.3 mm screws from the LCD panel using a Phillips #00 screwdriver.
+[* red] Remove the two 3.3 mm screws from the silver panels using a Phillips #0 screwdriver.
+[* orange] Remove the two 3.3 mm screws from the LCD panel using a Phillips #0 screwdriver.
[* black] Carefully lift the screen towards you. You may use the spudger to assist lifting the screen. There will be one more connector on the side of the screen.
[* yellow] Carefully remove the ribbon connectors by gently pulling with your fingers.