Saltar al contenido principal

Cambios al paso #4

Editado por Claire Smith

Edicion aprobada por Claire Smith

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Remove the two screws on the silver panels.
-[* orange] Remove the two screws on the LCD panel.
-[* black] Carefully lift the screen towards you. You may use the spudger to assist lifting the screen. There will be one more connector on the opposite side of the screen.
-[* yellow] Carefully remove the connectors.
+[* red] Loosen and remove the 2 PH #00 3.3mm screws on the silver panels.
+[* orange] Loosen and remove the 2 PH #00 3.3mm screws on the LCD panel.
+[* black] Carefully lift the screen towards you. You may use the spudger to assist lifting the screen. There will be one more connector on the side of the screen.
+[* yellow] Carefully remove the ribbon connectors by gently pulling with your fingers.