Cambios al paso #1
Editado por Sarah Westberg —
Edicion aprobada por Sarah Westberg
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* icon_caution] Power down the |
|---|---|
| + | [* icon_caution] Power down the laptop and disconnect it from the charger. |
| [* black] Flip your laptop over so the bottom is facing up. | |
| - | [* icon_note] Work on a clean, static-free surface. |
| [* red] Use a JIS screwdriver to remove the ten screws from the bottom case. | |
| - | [* black] Use an opening tool to pry the back case off. |
| - | [* black] Work your way around the periphery of the laptop to release the tabs connecting the top and bottom of the device. |
| + | [* black] Use an opening tool to carefully pry off the back case. Move around the edges of the laptop to release the tabs securing the top and bottom halves of the device. |
| [* icon_note] If the tabs reconnect, insert opening picks between the two halves to keep them separated while you continue prying the rest of the bottom case. | |
| [* orange] Use the flat end of a spudger to lift and unclip the outer edges of the [guide|25629|battery connector|stepid=64971|new_window=true] from the motherboard. You may need to use your fingers to pull the connector completely out of its socket. |