Cambios al paso #1
Editado por Sarah Westberg —
Edicion aprobada por Sarah Westberg
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* red] Power down the computer. |
|---|---|
| - | [* black] Gather the necessary tools (e.g., anti-static wrist strap, screwdriver, and the new RAM module). |
| - | [* black] Place the computer on a clean, static-free surface. |
| + | [* icon_caution] Power down the computer and disconnect your device from the charger. |
| + | [* black] Flip your laptop over so the bottom is facing up. |
| + | [* icon_note] Work on a clean, static-free surface. |
| + | [* red] Use a JIS screwdriver to remove the ten screws from the bottom case. |
| + | [* black] Use an opening tool to pry the back case off. |
| + | [* black] Work your way around the periphery of the laptop to release the tabs connecting the top and bottom of the device. |
| + | [* icon_note] If the tabs reconnect, insert opening picks between the two halves to keep them separated while you continue prying the rest of the bottom case. |
| + | [* black] Use a spudger to disconnect the battery from the motherboard. |