Cambios al paso #2
Editado por Spencer Day —
Edicion aprobada por Spencer Day
- Antes
- Después
- Sin cambios
Líneas de Paso
| + | [title] Remove the USB board |
|---|---|
| + | [* black] Use your fingers to lift the skinnier side of the board. |
| + | [* black] Pull the board away from the enclosure and out from under its [link|https://guide-images.cdn.ifixit.com/igi/4xDP16IFhHm2xUxH.full|clips|new_window=true] to remove it. |
| + | [* black] Check if your replacement board comes with a cable. If it doesn't, remove the cable from your original board and transfer it to your replacement. |
| + | [* icon_reminder] During reassembly, first insert the board under its clips on the wider edge of the enclosure and then lay the board into place. |
Imagen 1
Ninguna imagen anterior
Añadido
Imagen 2
Ninguna imagen anterior
Añadido
Imagen 3
Ninguna imagen anterior
Añadido