Cambios a este Paso
Editado por Anthony Wink —
Edicion aprobada por Anthony Wink
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* |
|---|---|
| + | [* red] Get a++ J0 size Phillips head screwdrive++r to remove the 11 screws that hold the bottom to the laptop. |
| [* icon_caution] Make sure all the screws on this side get taken out because there could be a*** label ***or ***warranty sticker*** covering up a screw that might be missed. | |
| [* black] Store the screws somewhere safe and begin popping out the base section of the laptop. Use the plastic prying tool and slide it in the crack between the chassis and the base then carefully lift up like a wedge. |