Cambios al paso #5
Editado por Spencer Day —
Edicion aprobada por Spencer Day
- Antes
- Después
- Sin cambios
Líneas de Paso
| [title] Remove the board shield | |
| [* black] Use a T8 Torx driver to remove the nine screws securing the board shield: | |
| [* red] Seven 8.7 mm‑long screws | |
| [* orange] Two 35 mm‑long screws | |
| - | [* icon_note] These screws are very tight and |
| + | [* icon_note] These screws are very tight and may take significant force to loosen. |
| [* yellow] One 13 mm‑long screw |