Cambios al paso #8
Editado por Caleb Karlson —
Edicion aprobada por Caleb Karlson
- Antes
- Después
- Sin cambios
Líneas de Paso
| + | [* black] Now that you have the plastic frame removed, you have free access to the other hinge screws. Same with the previous step, tighten them if they need tightening, unscrew them ''slightly'' if they are too tight. |
|---|---|
| + | [* black] Once you have adjusted each side, examine the area for broken plastic pieces. Although this isn't part of the repair, it's possible that while it was in use, plastic clips may have broken off, or (if you weren't carefuly), they might have broken off while you were doing the repair. Either way, remove any visible loose pieces. |
| + | [* black] Once you have tightened the screws to your liking, carefully test it by opening and closing the screen. Hopefully, you have now fixed the issue and you won't have any problems for the foreseeable future. |
| + | [* black] Once you believe you are finished, push the frame back into place with your hands, and slide your finger along the edge to make sure the clips have clipped in. |
Imagen 1
Ninguna imagen anterior
Añadido
Imagen 2
Ninguna imagen anterior
Añadido
Imagen 3
Ninguna imagen anterior
Añadido