Saltar al contenido principal

Cambios a Paso #3

Editado por Andrew Bookholt

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Lift the inner edge of the hardoptical drive and maneuver its connector past the frame attached to the logic board.
[* black] Carefully pull the optical drive off its mounting pins on the edge of the outer case to gain clearance for disconnecting the hardoptical drive cable.
[* black] Lift the inner edge of the hardoptical drive and maneuver its connector past the frame attached to the logic board.
[* black] Carefully pull the optical drive off its mounting pins on the edge of the outer case to gain clearance for disconnecting the hardoptical drive cable.