Saltar al contenido principal

Cambios al paso #1

Editado por Andrew Bookholt

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Remove the following four screws securing the power supply to the outer case:
[* red] Two 22.2 mm fine-thread T10 Torx
[* orange] One 25 mm coarse-thread T10 Torx
[* yellow] One 9 mm coarse-thread T10 Torx
[* icon_caution] The next few steps bring your hands close to the exposed face of the power supply. To avoid a high voltage shock from the many large capacitors attached to the board, '''do not''' touch the face of the power supply.