Repara tus cosas Comunidad Tienda

Cambios al paso #9

Editado por Spencer Pennington —

Edicion aprobada por Spencer Pennington

Antes
Después
Sin cambios

Líneas de Paso

[title] Remove the rear case
-[* icon_caution] If at any point the case feels stuck, stop and look for any clips that may have re-engaged and release them.
-[* black] Hold the top case with one hand at the bottom of one grip.
+[* icon_caution] If at any point the case feels stuck, stop and look for any clips that may have re-engaged and release them with the opening pick to avoid damaging them.
+[* black] Hold the main body of the controller with one hand.
[* black] Lift the rear case with your other hand. It should lift at an angle.
[* black] Pushing slightly towards the L and R buttons, lift the rear case off of the controller and remove it.
+[* icon_reminder] During reassembly, make sure the plastic covers for the adaptive trigger assembly adjustment sliders are correctly installed over the sliders.