Repara tus cosas Comunidad Tienda

Cambios al paso #1

Editado por Spencer Pennington —

Edicion aprobada por Spencer Pennington

Antes
Después
Sin cambios

Líneas de Paso

[title] Remove the L1 and R1 buttons
-[* icon_caution] The L1 and R1 buttons are held in by [link|https://guide-images.cdn.ifixit.com/igi/Fur1b2rTbSNBpYrM.full|two clips|new_window=true]. If only one clip releases, move your spudger to the other side of the button to release the remaining clip. Don't continue prying on one side after a clip is released, or you risk breaking the other clip.
-[* black] Insert the flat end of a spudger in the gap between the L1 and L2 buttons.
- [* icon_note] The buttons tend to shoot out in the next step. You can place your thumb over the button to prevent this.
-[* black] Use the spudger to pry out and remove the L1 button.
-[* black] Repeat this process to remove the R1 button.
+[* icon_caution] The ***L1*** and ***R1*** buttons are held in by [link|https://guide-images.cdn.ifixit.com/igi/Fur1b2rTbSNBpYrM.full|two clips|new_window=true]. If only one clip releases, move your spudger to the other side of the button to release the remaining clip. Don't continue prying on one side after a clip is released, or you risk breaking the other clip.
+[* black] Insert the flat end of a spudger in the gap between the ***L1*** and ***L2*** buttons.
+[* black] Use the spudger to pry out the ***L1*** button.
+ [* icon_note] The buttons tend to shoot out in this step. You can place your thumb over the button to prevent this.
+[* black] Repeat this process to remove the ***R1*** button.