Cambios al paso #1
Editado por Spencer Pennington —
Edicion aprobada por Spencer Pennington
- Antes
- Después
- Sin cambios
Líneas de Paso
| + | [title] Pry out the L1 and R1 buttons |
|---|---|
| + | [* icon_caution] The L1 and R1 buttons are held in by [link|https://guide-images.cdn.ifixit.com/igi/Fur1b2rTbSNBpYrM.full|two clips|new_window=true]. If only one clip releases, move your spudger to the other side of the button to release the remaining clip. Do not continue prying on one side after a clip is released, or you risk breaking the other clip. |
| + | [* black] Insert the flat end of a spudger in the gap between the L1 and L2 buttons. |
| + | [* icon_note] The buttons tend to shoot out in the next step. You can place your thumb over the button to prevent this. |
| + | [* black] Pry the spudger upward to remove the L1 button. |
| + | [* black] Repeat this process to remove the R1 button. |
Imagen 1
Ninguna imagen anterior
Añadido
Imagen 2
Ninguna imagen anterior
Añadido
Imagen 3
Ninguna imagen anterior
Añadido