Saltar al contenido principal

Cambios al paso #8

Editado por Joshua Byrne

Edicion aprobada por Joshua Byrne

Antes
Después
Sin cambios

Líneas de Paso

+[title] Replacement Note: New Heatsink
+[* icon_note] Perform the following steps once you have installed the new processors and ready to re-install the heatsinks.
+[* black] Preparing a New Heatsink for Re-installation. If you have a existing heatsink, follow the EXISTING Heatsink procedure.
+ [* black] Apply the top gasket included in the parts box to the top of the heatsink.
+ [* black] If you are replacing the lower processor heatsink with a new heatsink, install the bumper included in the parts box on the side of the heatsink.
+ [* icon_note] Do not apply thermal grease to a new heatsink. It comes with thermal grease already in place, covered by a cap over the bottom of the heatsink. Before installation, remove the cap.

Imagen 1

Ninguna imagen anterior

Añadido

Imagen 2

Ninguna imagen anterior

Añadido