Cambios al paso #1
Editado por oldturkey03 —
Edicion aprobada por oldturkey03
- Antes
- Después
- Sin cambios
Líneas de Paso
| + | [* black] Power down the phone Remove Battert cover and battery Remove Sim card SD card if installed Remove the 2 Torx 5 screws and the small Phillips screw to remove the bezel Use a plastic opening tool starting at the top of the phone and working all the way around Remove 4 torx 5 screws |
|---|---|
| + | [* black] Remove the WiFi antenna by gently prying it up. Loosen the three button ribbons. These are adhered to the midfarme. Gently lift them off the frame with a opening tool. Release all the clips that atache the midfamr to the front bezel. Caution, stay away from th contacts in the mid farme so as to damage these. |
| + | [* black] Remove the 2 small Phillips scres that hold the notherboard to the front bezel Gentlry separate the power button from the frame lift the vibrat motor from the recess to gain access to the ribbon connector |