Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #6

Editado por David Newberry

Edicion rechazada por Adam O'Camb

Antes
Después
Sin cambios

Líneas de Paso

[title] Removing the rails from the drive
[* black] Remove the plastic rails from the old drive and place them on the new drive.
[* black] Repeat the procedure in reverse, inserting the new drive with the plastic rails into the computer with the SATA port in the same orientation as the old one. then, clip the plastic cover into place and screw it in, install the battery and turn the computer on.