Saltar al contenido principal

Cambios a Paso #9

Editado por Andrew Optimus Goldheart

Edicion aprobada por Andrew Optimus Goldheart

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Once allUse a dry microfiber cloth to clean the adhesive strips have been applied, reassemble your iPadLCD and install yourinside of the front panel assemblyglass. You may want to use canned air or an air compressor to blow away and dust.
[* black] Before closing your front panel, useUse a pair of tweezers to peel the clear backing up off each adhesive strip.
[* icon_reminder] Make sure that each adhesive strip is placed inicon_note] Close the correct locationfront panel down onto the iPad, careful to place it within the plastic bezel, and orientation before peelingcareful not to get any dirt or fingerprints between the backingglass and LCD.
[* black] Some oficon_note] To ensure a good seal, place the adhesive strips are smalliPad face down on a padded envelope or cloth and may require some patiencepile a couple of books above it to peelweigh the backingscreen down. Leave it like this for a few hours before using.
[* black] Once allUse a dry microfiber cloth to clean the adhesive strips have been applied, reassemble your iPadLCD and install yourinside of the front panel assemblyglass. You may want to use canned air or an air compressor to blow away and dust.
[* black] Before closing your front panel, useUse a pair of tweezers to peel the clear backing up off each adhesive strip.
[* icon_reminder] Make sure that each adhesive strip is placed inicon_note] Close the correct locationfront panel down onto the iPad, careful to place it within the plastic bezel, and orientation before peelingcareful not to get any dirt or fingerprints between the backingglass and LCD.
[* black] Some oficon_note] To ensure a good seal, place the adhesive strips are smalliPad face down on a padded envelope or cloth and may require some patiencepile a couple of books above it to peelweigh the backingscreen down. Leave it like this for a few hours before using.