Saltar al contenido principal

Cambios a Paso #1

Editado por Walter Galan

Edicion aprobada por Walter Galan

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] In the following steps, you will be placing the remaining pieces of adhesive on the front panel.
[* black] '''Do not peel the blackclear backing off the strips just yet.'''
[* black] '''Do not peel the blackclear backing off the strips just yet.'''
[* black] Place the bridge shaped adhesive strip between the top edge of the inner frame of the front panel and the camera mounting bracket.
[* black] Smooth the strip down from the center out, taking care to not trap any air bubbles between the strip and the front panel.