Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #18

Editado por Andrew Bookholt

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Remove the following screws:
[* black] New linered] Seven 3.3 mm T6 Torx screws securing the logic board to the upper case.
[* black] New lineorange] Two 8 mm Phillips screws securing the DC-in board to the upper case.
[* black] New linered] Seven 3.3 mm T6 Torx screws securing the logic board to the upper case.
[* black] New lineorange] Two 8 mm Phillips screws securing the DC-in board to the upper case.
[* icon_caution] Do not remove the logic board yet! There are connectors attached to the underside of the logic board that must first be disconnected.

Imagen 1

Versión Antigua

Nueva Versión