Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #8

Editado por Andrew Optimus Goldheart

Edicion aprobada por Andrew Optimus Goldheart

Antes
Después
Sin cambios

Líneas de Paso

[* black] Using the flat end of a spudger, pry the subwoofer connector straight up from the connector jack.
[* black] WARNING:icon_caution] Be careful to pry the connector, not the socket. It's bestpossible to removeaccidentally pry the socket up from the logic board.
[* icon_note] Removing
the foam applied to the top of the connector so you can actually see the connector. It's very easywill make it easier to insert the spudger underneath the jacksee and pry it off by mistakeavoid prying up the socket.
[* black] WARNING:icon_caution] Be careful to pry the connector, not the socket. It's bestpossible to removeaccidentally pry the socket up from the logic board.
[* icon_note] Removing
the foam applied to the top of the connector so you can actually see the connector. It's very easywill make it easier to insert the spudger underneath the jacksee and pry it off by mistakeavoid prying up the socket.