Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #8

Editado por shop

Edicion aprobada por Andrew Optimus Goldheart

Antes
Después
Sin cambios

Líneas de Paso

[* black] Using the flat end of a spudger, pry the subwoofer connector straight up off the logic board.
[* black] WARNING: It's best to remove the foam applied to the top of the connector so you can actually see the connector. It's very easy to insert the spudger underneath the jack and pry it off by mistake.