Cambios al paso #4
Editado por William Cook —
Edicion aprobada por William Cook
- Antes
- Después
- Sin cambios
Líneas de Paso
| + | [* icon_note] Follow this step if the wires are not connected. |
|---|---|
| + | [* black] Remove the old USB wiring as best as possible from the circuit board. |
| + | [* icon_caution] Try to not be too rough. If needed, use wire strippers to remove the wires. |
| + | [* black] Remember the locations of the color coded USB wires and solder each into their respective places. |
| + | [* icon_caution] Take your time. Do not add too much solder; you could potentially fry the board if you do. |
Imagen 1
Ninguna imagen anterior
Añadido