Cambios al paso #1
Editado por Kristen Gismondi —
Edicion aprobada por Kristen Gismondi
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* icon_caution] Replacing internal components improperly can lead to irreversible damage if not done correctly. |
|---|---|
| - | [* icon_note] Depending on where the soundbar is damaged, there are two different ways to remove the USB cable. This guide will try to cover both scenarios. |
| - | [* black] After disconnecting both speakers, unscrew the screws connecting the circuit board to the rear panel using a Phillips #1 screwdriver. |
| - | [* icon_note] The screws are 2.5 mm in diameter and 6mm in length. Like most screws, turn counter-clockwise to loosen them. |
| + | [* icon_note] Depending on where the soundbar is damaged, there are two different ways to remove the USB cable. This guide will cover both scenarios. |
| + | [* black] Remove the 6 mm screws connecting the circuit board to the rear panel using a Phillips #1 screwdriver. |