Repara tus cosas Comunidad Tienda

Cambios al paso #1

Editado por Kristen Gismondi —

Edicion aprobada por Kristen Gismondi

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Using a Phillips J0 screwdriver, remove 6 4mm screws
-[* orange] Find the gap. Use the flat end of the spudger, slowly pry up the edge of the board.
-[* black] Move slowly in a counter-clockwise direction.
+[* red] Remove six 4 mm screws using a JIS #0 screwdriver.
+[* orange] Insert the flat end of a spudger in the gap between the motherboard and the rest of the mouse.
+[* black] Slowly pry up the edge of the board, moving around the mouse slowly in a counterclockwise direction.