Cambios al paso #1
Editado por Adam O'Camb —
Edicion aprobada por Adam O'Camb
- Antes
- Después
- Sin cambios
Líneas de Paso
| [title] Beginning (Parts, Tools and Laptop) | |
| - | [* black] Welcome to the Alienware M11xR3 disassembly. Below, I will describe the necessary tools and steps to disassemble the Alienware M11xR3. |
| - | [* black] |
| + | [* black] Welcome to the Alienware M11xR3 disassembly. Below, I will describe the necessary tools and steps to disassemble the Alienware M11xR3. This disassembly applies to all M11x, including the R1, R2, and R3. |
| + | [* black] Required tools: |
| [* blue] 1x Phillips #1 and #00 Screwdriver | |
| [* blue] 1x Flathead Screwdriver | |
| [* blue] 1x Small Needle Nose Pliers or Tweezers | |
| [* blue] 1x Thermal Paste and Finger Stalls Optional: Small water balloons (to spread thermal paste without getting dirty) | |
| [* blue] 1x Anti-Static Mat | |
| [* icon_reminder] I highly recommended reading about static electricity and how it can damage electronic components. |