Cambios al paso #1
Editado por Zachery Friedman —
Edicion aprobada por Adam O'Camb
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* black] Welcome to how to disassemble an Alienware M11xR3 |
|---|---|
| - | [* black] This teardown is valid for all M11x, including R1 |
| + | [* black] Welcome to how to disassemble an Alienware M11xR3. Below, I will describe the necessary tools and steps to tearing disassembling the Alienware M11xR3 with included pictures. |
| + | [* black] This teardown is valid for all M11x, including the R1, R2, and R3. |
| [* blue] 1x Phillips #1 and #00 Screwdriver | |
| [* blue] 1x Flathead Screwdriver | |
| [* blue] 1x Small Needle Nose Pliers or Tweezers | |
| [* blue] 1x Thermal Paste and Some Finger Stalls or in my case small water balloons (to spread thermal paste without getting dirty) | |
| [* blue] 1x Anti-Static Mat | |
| [* icon_reminder] It's recommended to read about Static electricity and how it can damage electronic components. |