Cambios al paso #35
Editado por Zachery Friedman —
Edicion aprobada por Adam O'Camb
- Antes
- Después
- Sin cambios
Líneas de Paso
| [title] Remove heat sink and apply thermal paste | |
| - | [* icon_note] If this is your first time applying thermal paste I recommend using a |
| + | [* icon_note] If this is your first time applying thermal paste, I recommend using a quality thermal paste brand like Arctic Silver and reading a guide here on iFixit. |
| [* icon_caution] With the motherboard out, turn it upside down on a static free surface. | |
| - | [* black] To remove the heatsink and replace thermal paste remove the screws in the correct order (marked with a number on the heatsink). |
| + | [* black] To remove the heatsink and replace thermal paste, remove the screws in the correct order (marked with a number on the heatsink). |
| [* icon_caution] Clean old thermal paste with isopropyl-alcohol. Ensure that after applying thermal paste it doesn't leak onto the motherboard (if it's on the green square, it's fine). | |
| [* icon_caution] When putting the heat sink back on, try to have the screw holes align on your first try. This is to maintain an even spread of the thermal paste. | |
| [* black] Rescrew in the correct order (refer to the numbers on the heat sink). | |
| [* icon_note] Torque each screw one at a time to end up with good heat dissipation. |