Repara tus cosas Comunidad Tienda

Cambios al paso #29

Editado por Ryan Velasco —

Edicion aprobada por Scott Havard

Antes
Después
Sin cambios

Líneas de Paso

-[* yellow] Extract the speakers connector from the I/O board
+[* yellow] Pull the speakers connector towards you from the I/O board.
[* red] Remove the 3 screws and lift as you see in the picture
-[* icon_note] To replace the speakers you must extract before the motherboard, and after remove 2 visible screws(see the picture in blue circle)
+[* icon_caution] Pull the board a little to the left while lifting to prevent damaging the two attached USB 3.0 ports.