Cambios al paso #2
Editado por Adam O'Camb —
Edicion aprobada por Adam O'Camb
- Antes
- Después
- Sin cambios
Líneas de Paso
| [title] Remove back plate screws. | |
| [* black] 1. Gently flip over the laptop so that the bottom side is facing up. | |
| - | [* yellow] Locate the 8 screws lining the perimeter of the base-plate. (1 screw is located directly in the center) |
| - | [* yellow] Remove the 8 screws securing the base-plate with a Phillips #1 Screwdriver. |
| + | [* yellow] Use a Phillips #1 screwdriver to remove the 8 screws securing the base-plate. |