| | [title] Remove the motherboard |
|---|
| | [* black] Identify and detach all cables. Be observant of the type of connector and cable. Make sure to release latches and only pull on the plastic part of the cable. Some cables require lifting a protective film to access it. |
|---|
| | [* black] The wide Motherboard/IO-cable is especially hard to to lift. Have patience to not rip the cable. Leave the protective film on the connector. |
|---|
| | [* black] The white antenna connector (black was removed in previous step) has a hard plastic cover, lift it slowly from the network-chip cover to not delaminate the metal cover from the chip. Follow the cables through the guided fits. |
|---|
| | [* black] The camera connector has the latch on the opposite side of the cable. |
|---|
| | [* black] Display cable should have been removed in the previous step. |
|---|