Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #2

Editado por Sam Goldheart

Edicion aprobada por Sam Goldheart

Antes
Después
Sin cambios

Líneas de Paso

[* blackicon_note] If the heat sink seems to be stuck to the logic board after removing all four screws, use a spudger to carefully separate the heat sink from the face of the CPU.
[* blackicon_note] If the heat sink seems to be stuck to the logic board after removing all four screws, use a spudger to carefully separate the heat sink from the face of the CPU.
[* black] Remove the heat sink from the logic board.
[* black] When reinstalling the heat sink, be sure to apply a new layer of [product|IF179-010|thermal paste]. If you have never applied thermal paste before, we have a [guide|744|guide] that makes it easy.