Saltar al contenido principal

Cambios al paso #2

Editado por Derricka Jones

Edicion aprobada por Derricka Jones

Antes
Después
Sin cambios

Líneas de Paso

[title] Loosen the back cover
-[* black] Insert a pry tool or your fingers (if safe and feasible) between the back cover. Gently run the tool along the edges to release any clips or latches holding the cover in place.
+[* black] Insert a pry tool or your fingers between the back cover. Gently run the tool along the edges to release any clips or latches.
[* icon_note] Apply gentle pressure to avoid damaging the case or components inside.
[* icon_caution] If you encounter significant resistance while trying to remove the back cover, it's possible that your model may have screws located beneath. Proceed cautiously by gently prying up the laptop to inspect for any more screws.