Saltar al contenido principal

Cambios al paso #5

Editado por Bill Gilbert

Edicion aprobada por Bill Gilbert

Antes
Después
Sin cambios

Líneas de Paso

+[title] Test the water dispensing switch
+[* icon_note] If you have a multimeter, you can test to see if your water dispensing switch is good or not. Set your multimeter to the continuity function, with beeper.
+[* black] Touch one probe to each of the switch terminals at the same time.
+[* icon_note] When you operate the small lever on the switch the meter should sound.
+[* icon_note] When you release the small lever on the switch the meter should not sound.
+[* black] If the switch does not operate as described above, replace it.

Imagen 1

Ninguna imagen anterior

Añadido

Imagen 2

Ninguna imagen anterior

Añadido

Imagen 3

Ninguna imagen anterior

Añadido