Saltar al contenido principal

Cambios al paso #13

Editado por mayer

Edicion aprobada por mayer

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Remove the six 4.1 to 4.4 mm T6 Torx screws securing the logic board to the upper case.
[* orange] Remove the two 4.1 to 4.5 mm T6 Torx screws securing the MagSafe board to the upper case.
[* red] Remove the six 4.1 to 4.4 mm T6 Torx screws securing the logic board to the upper case.
[* orange] Remove the two 4.1 to 4.5 mm T6 Torx screws securing the MagSafe board to the upper case.