Saltar al contenido principal

Cambios al paso #4

Editado por airshack

Edicion aprobada por Jake Devincenzi

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Use the flat end of a spudger to pry theCarefully pry the delicate rear speaker connector up off the logic board. These small L/R speaker connectors are quite easily broken.
[* icon_caution] This connector is very delicate and easily brokendestroyed. Consideration should be given to using a small flathead screwdriver or small pinhead to remove this connector in particular. USING THE SPUGER (as depicted) IS LIKELY TO BREAK THIS CONNECTOR.
[* black] Use the flat end of a spudger to pry theCarefully pry the delicate rear speaker connector up off the logic board. These small L/R speaker connectors are quite easily broken.
[* icon_caution] This connector is very delicate and easily brokendestroyed. Consideration should be given to using a small flathead screwdriver or small pinhead to remove this connector in particular. USING THE SPUGER (as depicted) IS LIKELY TO BREAK THIS CONNECTOR.