Saltar al contenido principal

Cambios al paso #4

Editado por Peterb

Edicion rechazada por David Hodson

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Use the flat end of a spudger to pry the rear speaker connector up off the logic board. Better is to take 2 needles and put them in the small connector holes on top and carefully to lift it up slowly. Breaking them will happen when you do it like displayed on the photo
[* black] Use the flat end of a spudger to pry the rear speaker connector up off the logic board. Better is to take 2 needles and put them in the small connector holes on top and carefully to lift it up slowly. Breaking them will happen when you do it like displayed on the photo
[* icon_caution] This connector is very delicate and easily broken.