Saltar al contenido principal

Cambios al paso #11

Editado por Kristen Gismondi

Edicion aprobada por Kristen Gismondi

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Place the small metal bolts back onto the screws and tighten them with a wrench.
-[* icon_note] Make sure the rubber grommet is in tact so that the wires do not backflow into the taillight.
+[* red] Place the small metal nuts back onto the screws and tighten them with a wrench.
+[* icon_note] Make sure the rubber grommet is intact so that the wires do not backflow into the taillight.