Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #2

Editado por XAVIER GARCIA

Edicion rechazada por Luis Villalpando

Antes
Después
Sin cambios

Líneas de Paso

[* black] Gently lift the glass panel perpendicular to the face of the LCD enough to clear the steel mounting pins attached along the underside of the top edge of the glass panel.
[* black] Pull the glass panel away from the lower edge of the iMac and carefully set it aside. Don't use the suction cups to carry the glass panel—if either one loses its grip, the panel could fall and breakAfter setting the glass panel down safely, be sure to release the suction cups, as the suction force over time, can crack the glass.
[* icon_caution] After setting the glass panel down safely, be sure to release the suction cups, as the suction force over time, can crack the glass.
[* icon_caution] During reinstallation, be sure to meticulously clean the inside of the glass panel and the face of the LCD as any dust or fingerprints trapped inside will be annoyingly visible when the machine is turned on.
[* icon_reminder] Insertar traducción Don't use the suction cups to carry the glass panel—if either one loses its grip, the panel could fall and break.