Saltar al contenido principal

Cambios al paso #7

Editado por Ben Eisenman

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Lift the upper case off completely and disconnect the multicolored speaker cable from the logic board. As before, make sure you're pulling only on the connector and not on the socket.
[* blackicon_note] Tip: Thethe multi-coloured cable ismay be easier and less daunting to disconnect after removing the top heat shield. Prop the top case upright while removing the shield - the connector is then much more accessible.
[* blackicon_note] Tip: Thethe multi-coloured cable ismay be easier and less daunting to disconnect after removing the top heat shield. Prop the top case upright while removing the shield - the connector is then much more accessible.