Saltar al contenido principal

Cambios al paso #5

Editado por steadfast I and I

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Carefully lift the upper case about half of an inch and move it so that you can access the power and speaker cables.
[* icon_note] If you skipped removing the DC-in board, this step requires a little more finess. Swivel the upper case to the right around the power port and lift the front up a little to free it.
[* black]
If the upper case is sticking, it may be necessary to free the tabs holding theteh upper case to the metal framework along the outer edge of the battery compartment.
[* icon_note] If you skipped removing the DC-in board, this step requires a little more finess. Swivel the upper case to the right around the power port and lift the front up a little to free it.
[* black]
If the upper case is sticking, it may be necessary to free the tabs holding theteh upper case to the metal framework along the outer edge of the battery compartment.