Saltar al contenido principal

Cambios al paso #4

Editado por iRobot

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* icon_note] Before you can yank the upper case off, you must disconnect the trackpad connector, the blue and white power cable, and speaker cable as described in the next steps.
[* black] Lift the upper case from the right side and use a spudger or your finger to disconnect the trackpad connector hidden beneath the white plastic tab. Due to model variatons your trackpad connector may be different from the one pictured.

Imagen 1

Ninguna imagen anterior

Añadido