Saltar al contenido principal

Cambios al paso #3

Editado por iRobot

Aprobación pendiente

Sin cambios

Líneas de Paso

[* black] Remove the following 7 screws from the edges of the keyboard area.
[* red] Three 2 mm Phillips along the right edge.
[* orange] One 4.5 mm Phillips underneath where the magnet was.
[* yellow] One 6 mm Phillips with a small head in the lower left corner.
[* green] Two 6 mm Phillips with large heads, one in the upper left corner and one in the middle

Imagen 1

Ninguna imagen anterior