Repara tus cosas Comunidad Tienda

Cambios al paso #9

Editado por Andy Barrientos —

Edicion aprobada por Andy Barrientos

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Place new sprocket on the cranks with the corresponding whole to hold the sprocket still
-[* black] Tighten bold to keep the sprocket in place (optional depending on bike cranks)
-[* black] push cranks back onto the crank spindle still it stops movie and other crank isn't pushed out
-[* black] make sure that the crank is placed well and balanced
+[* black] Place the new sprocket on the cranks with the corresponding whole to hold the sprocket still
+[* black] Tighten the bolt to keep the sprocket in place (optional depending on bike cranks)
+[* black] Push the cranks back onto the crank spindle still it stops movie and other crank isn't pushed out
+[* black] Make sure that the crank is placed well and balanced