Cambios al paso #1
Editado por Cameron Anderson —
Edicion aprobada por Cameron Anderson
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] Start By facing the device upside down | |
| - | [* black] remove the following ?? screws |
| - | [* black] Carefully pry off the back plate. |
| - | [* black] Locate the Hard drive |
| + | [* black] locate the 7 Phillips #1 screws |
| + | [* black] Remove the 7 screws |
| [* black] Unclip the clip on the ribbon cable for the hard drive | |
| [* black] Unplug the sata cable from the hard drive | |
| [* black] Remove the Hard drive from the device |