Saltar al contenido principal

Cambios al paso #1

Editado por Cameron Anderson

Edicion aprobada por Cameron Anderson

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Start with facing the device downwards.
+[* black] Start By facing the device upside down
[* black] remove the following ?? screws
+[* black] Carefully pry off the back plate.
+[* black] Locate the Hard drive
+[* black] Unclip the clip on the ribbon cable for the hard drive
+[* black] Unplug the sata cable from the hard drive
+[* black] Remove the Hard drive from the device